Xerox Fault Code 043-343 [repack]

Power Cycle

: Turn the printer off, wait at least 20 seconds , and turn it back on.

Inspect the encoder strip and sensors

Step 1: Perform a Full Power Cycle (The "Hard Reboot")

• Fault code 043-343 is an error reported by certain Xerox multifunction printers (MFPs) during scanning or copying operations. It typically indicates a problem in the scanner assembly related to image sensor communication, paper path obstruction near the scanner, or a failure in the scanner’s encoder/position feedback mechanism. Symptoms often include failed scans, blank or distorted scan images, repeated error pop-ups, and the machine pausing or requiring a restart.

Summary of behavior

Abstract

Fault Code 043-343 is triggered when the printer's internal sensors detect that the waste ink container or the overflow reservoir within the IMS is at maximum capacity, or that the mechanism responsible for removing waste ink has failed. Xerox Fault Code 043-343

Essentially, the machine's software and its internal hardware components are communicating conflicting information about whether the color drive is engaged or disengaged. Recommended Troubleshooting Steps Power Cycle : Turn the printer off, wait

Xerox Color 550/560/570

This code typically appears on , Versant 80/180 , D95/D110/D125 , and some PrimeLink models. It indicates a IIT (Image Input Terminal) / Document Feeder communication or hardware timing error , specifically related to the Document Feeder Registration Clutch or Home Position Sensor . Fault code 043-343 is an error reported by