Vestel 17ips62 Schematic
The Vestel 17IPS62 is a widely used power supply unit (PSU) found in 32- to 55-inch LED TVs, with various revisions (R2, R4) designed to support different screen specifications. Technical schematics for these revisions, along with detailed component lists for addressing common failures like blown primary components or shorted diodes, are available through specialized electronics repair sites. For direct access to the schematics, download the PDF, such as the one found on Elektrotanya . AI responses may include mistakes. Learn more
Common TV Models Using 17IPS62
PWR-ON
| Pin # | Label | Function | Voltage (approx.) | | :--- | :--- | :--- | :--- | | 1 | 12V | Main Power | 12V (Only when TV is ON) | | 2 | 12V | Main Power | 12V (Only when TV is ON) | | 3 | GND | Ground | 0V | | 4 | GND | Ground | 0V | | 5 | | Power On Command | 0V (Standby) / 3.3V (ON) | | 6 | DIM | Backlight Dimming | PWM Signal (0V-3V) | | 7 | BL-ON | Backlight Enable | 0V (Off) / 3.3V (ON) | | 8 | 5V | Standby Voltage | 5V (Always present) | | 9 | 5V | Standby Voltage | 5V (Always present) | | 10 | GND | Ground | 0V | vestel 17ips62 schematic
Fault #2: 5VSB Present, No 12V/24V (TV won't turn on)
) or secondary side diodes often fail or short-circuit. Upgrading to is a common repair practice. Chopper MOSFET : The main power transistor (e.g., MMD70R600P IPD70R600P ) can fail, usually blowing the main 3.15A fuse Board Material : The board is typically made of The Vestel 17IPS62 is a widely used power
The Gateway (+400V):
The journey starts at the bridge rectifier, where AC is converted to high-voltage DC, often around 400V. Use voltage maps available on repair forums for 17IPS62
