Vcds Atmega162 Reflash -
VCDS (HEX-USB+CAN) clone
Reflashing a based on the ATmega162 microcontroller is often necessary to unbrick a "de-licensed" cable or to upgrade its firmware for compatibility with newer software versions. 1. Required Components To perform the reflash, you typically need:
avrdude -c usbasp -p m162 -U flash:v:hexfile.hex -U eeprom:v:eepfile.eep vcds atmega162 reflash
avrdude -c usbasp -p m162 -e
- Disconnect the programmer.
- Plug VCDS cable into PC USB.
- Install FTDI or VCP drivers if needed.
- Open VCDS software → Options → Test. It should show "Interface: Found".