6 Free Font Finder Tools to Easily Identify Fonts from Any Image

Vag+eeprom+programmer+120 May 2026

What is a VAG EEPROM Programmer?

  1. Insert the CD (or download from a reliable source). The key file is VAG_EEPROM_Programmer_v120.exe.
  2. Install CH340/CH341 drivers. Most clones use this USB-to-Serial chip. Download the latest CH341SER.EXE.
  3. Connect the programmer via USB. A red LED should illuminate.
  4. Configure the settings: Open the software, go to Settings > Ports. Select the COM port assigned to the CH340. Set Baud Rate to 9600 for stability.

The VAG EEPROM Programmer 120 is a hardware device that connects to the vehicle's OBD-II port or directly to the EEPROM chip. It uses proprietary software to communicate with the vehicle's ECU and modify the EEPROM contents. The device can read and write data to the EEPROM, allowing users to modify various vehicle settings, such as:

Immobilizer Data

: Reads the 4-digit login (SKC) code from instrument clusters (DASH) or engine ECUs, which is essential for programming new keys. vag+eeprom+programmer+120

  • Read the EEPROM from the dashboard (e.g., 93C56).
  • Open the binary file in a companion tool like VAG DASH Editor.
  • Locate the Immo bytes (usually at address 0x1F0 to 0x200).
  • Modify specific values to "turn off" the immo or reset the login code (PIN).
  • Write the modified file back to the EEPROM.
  • Result: The car starts without needing a dealer scan tool.

When searching for the "vag eeprom programmer 120" on Amazon, eBay, or AliExpress, look for a kit that includes: What is a VAG EEPROM Programmer

Introduction: What is the VAG EEPROM Programmer 120?

Connect:

Plug your KKL cable into the OBD-II port and your laptop. Turn the ignition to the "ON" position (engine off). Insert the CD (or download from a reliable source)

  • Tuning and Performance Modification: The programmer can be used to optimize engine performance, improve fuel efficiency, and enhance overall drivability.
  • Diagnostic and Repair: The programmer can be used to diagnose and repair issues related to the EEPROM, such as faulty sensor readings or incorrect engine calibration.
  • Immobilizer and Key Programming: The programmer can be used to program new keys, repair immobilizer issues, and modify immobilizer settings.
  • Coding and Configuration: The programmer can be used to modify vehicle configuration and calibration, such as adjusting transmission settings or modifying engine parameters.