Usbstor Diskgeneric-usb-flash-disk--7.76

The string "USBSTOR\DiskGeneric-USB-Flash-Disk--7.76" is a Hardware ID used by the Windows operating system to identify and communicate with a specific type of USB storage device. Understanding the Identifier

6. Troubleshooting Common Issues

"USBSTOR\DiskGeneric-USB-Flash-Disk--7.76"

The identifier is a specific Hardware ID used by the Windows operating system to identify and communicate with a connected USB flash drive . While it looks like a cryptic error code or a specific model name, it is actually a standardized string generated by the USBSTOR.SYS driver based on information provided by the device's firmware. Usbstor Diskgeneric-usb-flash-disk--7.76

. It refers to the specific version of the internal software (firmware) programmed onto the flash drive’s controller chip. Why You Might See This The string "USBSTOR\DiskGeneric-USB-Flash-Disk--7

The string is broken down into parts that tell Windows which driver to load: Model Number: 7

Technical Report: USB Flash Drive Device Identification

If the yellow exclamation returns after reboot, you must manually clean the registry.

• Model Number: 7.76
• Capacity: 16GB (actual capacity: approximately 8GB)
• Interface: USB 2.0
• Speed: Up to 480 Mbps (theoretical)
• Dimensions: 55mm x 20mm x 10mm

1. Reinstall the Driver

If your device shows up in Device Manager with this ID but has a yellow exclamation mark or is not appearing in "This PC," follow these steps to restore functionality: Corrupted drivers often cause recognition errors. Open Device Manager (Right-click Start > Device Manager). Expand Universal Serial Bus controllers or Disk drives .