Ufs3 Sarasoft Setup May 2026

Setting up the UFS-3 SarasSoft (HWK box) involves installing the UFS HWK Panel (v2.3.0.x or 3.01) and drivers, running the panel as an administrator to detect the hardware, and performing an update, though server issues may require offline workarounds. Users must connect the box via USB, verify the HWK module status, and install necessary software modules like DCTxBB5. For more details, visit

  • A Windows 10 or 11 PC (64-bit recommended). Windows 7 may work but is obsolete.
  • .NET Framework 4.8 or later.
  • Microsoft Visual C++ Redistributables (2015-2022).
  • Device drivers: Samsung USB Driver, Qualcomm HS-USB QDLoader 9008 driver, and the UFS3 box driver.
  • Sarasoft Software: Obtain the latest version from an official or trusted source (e.g., sarasoft-dot-com or authorized resellers).

8. Safety & Legal Disclaimer

  • Voltage Settings: Go to Config > Voltage. For UFS 2.1, select 1.8V. For UFS 3.1, select 1.2V. Wrong voltage = chip dead.
  • Protocol: In the main drop-down menu, select UFS 3.0/3.1 (not eMMC or SPI).
  • Timeout Settings: Increase Command Timeout to 10,000 ms for slow or damaged chips.
  • Logging: Enable Verbose Logging (Console > Log Level > DEBUG). This saves a .txt log to C:\SaraSoft\logs. Essential for tech support.
  1. In Sarasoft, navigate to Help → Update Firmware (or “Box Firmware Upgrade”).
  2. The software will detect the current firmware version.
  3. Click “Update.” Do not disconnect the USB cable or power off your PC during this process. A failed firmware update can brick the UFS3 box.
  4. Wait for the progress bar to reach 100% and the box to reset automatically.