Strands S68 Drill Press Manual
Strands S68 Drill Press Manual — Lively Exposition
Recommended Speeds (RPM)
- Secure workpiece with a vise or hold-down clamps. Never hold by hand.
- Center the bit over the mark.
- Turn on the motor and allow spindle to reach full speed.
- Feed slowly using the handles. Apply steady, moderate pressure.
- For deep holes (more than 3× bit diameter), peck drill—retract frequently to clear chips.
Below is a breakdown of its key features and operational manual.
- This guide is for reference only – always defer to original documentation.
- Improper use or lack of maintenance voids any remaining warranty and risks injury.
- Keep this guide near the machine and train all operators.
Who Should Choose the S68?
- Wood: Fast, clean holes with minimal tear-out when using sharp brad or Forstner bits.
- Metal: With slower speeds and proper lubrication, the S68 handles mild steel and aluminum reliably.
- Plastics/composites: Lower RPMs and gentle feeds prevent cracking or melting.
Because Strands is no longer producing this specific model, obtaining original parts diagrams can be difficult. Strands S68 Drill Press Manual