Based on the string , here is the breakdown of what this marking means and why a specific "datasheet" for the entire device is likely not available under that exact name.
Why would an engineer specifically filter by "94V-0"? Safety and reliability. These connectors are mandatory in: sh1 94v-0 datasheet
The marking (often accompanied by ) typically refers to a specific Printed Circuit Board (PCB) "sh1 94v-0" Based on the string , here
| Feature | JST SH1 94V-0 | Molex PicoBlade (51021) | Hirose DF13 | | :--- | :--- | :--- | :--- | | | 1.0mm | 1.25mm | 1.25mm | | Current | 1.0A | 1.5A | 1.0A | | V-0 Availability | Yes (Select series) | Yes (Nylon 46) | Yes (Select series) | | Interchangeable? | No (Different pitch) | No | No | These connectors are mandatory in: The marking (often
: This is a manufacturer-specific identifier or a UL tracking code for the raw PCB board. It does not describe the functionality of the device (like a router or power supply) but identifies the factory or the specific laminate type used. 2. Common Devices Using this Marking
: Precautions against Electrostatic Discharge during handling are standard. Renesas Electronics 5. Application Areas Power Supplies
If you found this inside a consumer electronic device, it is likely one of the following (where "SH1" is the connector name):