Qidi X-pro Manual ((new)) May 2026
Initial Setup and Unboxing
The QIDI X-Pro is a versatile, fully enclosed 3D printer featuring a unique dual direct-drive extrusion system designed for multi-material and multi-color printing. While the machine is largely pre-assembled, effective operation depends on following a precise setup and maintenance routine.
The Foam Trick:
Don't just yank the foam from under the build plate. Plug the printer in, go to Tools > Manual , and use the touch screen to raise the Z-axis (the bed) so you can slide the protective foam out safely. 2. Setting Up the Dual Extruder qidi x-pro manual
Remember: The dual extruder is your greatest strength. Master the offset calibration (Chapter 3), respect the material limits (Chapter 4), and perform weekly maintenance (Chapter 6). Keep a copy of this article saved alongside your official PDF, and you will be printing dissolvable supports and high-strength engineering parts in no time. Initial Setup and Unboxing The QIDI X-Pro is
Part 3: Navigating the UI – A Manual Deep Dive
Filament Diameter:
This post serves as your quick-start digital manual to get you up and running with the QIDI X-Pro . 1. Key Specifications to Know Before you start slicing, keep these core specs in mind: 1.75mm. Nozzle Size: 0.4mm (Standard). Extrusion Type: Dual Extruder (Direct Drive). Build Volume: 230 x 150 x 150 mm. 2. Getting Started: The First Print Plug the printer in, go to Tools >
Prepare > Preheat PLA
"1. Ensure the nozzle is heated. Navigate to (or ABS). 2. Wait for the nozzle temperature to reach the target. 3. Press the extruder arm lever and insert the filament into the feed tube. 4. Push the filament through until you see plastic oozing out of the nozzle tip."