Orbitor Prospector 100 Metal Detector Manual Direct

Orbitor Prospector 100 Metal Detector Manual

Appendix

• Press the spring-loaded locking pin on the lower stem.
• Slide into the upper stem until the pin clicks into one of the adjustment holes.
• Twist the locking collar to secure.

• You are near a cell phone or power line (Move 50 feet).
• Sensitivity is maxed out (Turn down to 5).
• The coil cable is loose (Secure the cable at the control box).

For a more comprehensive look, you can view similar entry-level guides like this Metal Detector User Manual Guide on Scribd . If you’d like, I can help you:

ignore

Discrimination is a filter. It tells the machine to certain metals. Orbitor Prospector 100 Metal Detector Manual

Tools needed:

Phillips screwdriver (included with most packages). Orbitor Prospector 100 Metal Detector Manual Appendix

: Adjusts the loudness of the internal speaker or connected headphones. Operational Tips for Success Orbitor Prospector 100 just given to me 18 Mar 2019 — Press the spring-loaded locking pin on the lower stem

• Loosen the two cam locks on the middle and upper stem.
• Insert the lower stem (attached to the coil) into the middle stem.
• Adjust the length so that when you stand upright, the coil hovers 1–2 inches above the ground with your arm relaxed.
• Tighten the cam locks firmly.