Motorola Cp140 Programming Software High Quality

To program a Motorola CP140 portable radio, you need the proprietary Customer Programming Software (CPS)

Scan Lists:

Group channels together for the radio to monitor simultaneously. motorola cp140 programming software

Programming New Frequencies

  1. In the left tree menu, expand Conventional Personality.
  2. Double-click a channel number (1 through 16).
  3. Enter the Rx Frequency (receive) and Tx Frequency (transmit). For simplex, enter the same frequency for both.
  4. Set the Interference Eliminator Code (Motorola’s term for CTCSS or DCS). For no tone, set to "0" or "CSQ" (Carrier Squelch).
  5. Use the "Write" button (or Ctrl+W) to save changes to the codeplug in memory.

4. Operational Procedure

Software Name

: The official tool is the Motorola Commercial Series CPS , which is compatible with the entire CP range (CP040, CP140, CP160, and CP180). To program a Motorola CP140 portable radio, you

: A USB-to-serial cable with a 2.5mm or 3.5mm micro-jack is required. Software Setup : After installation, a computer restart In the left tree menu, expand Conventional Personality

Technically, no. Motorola sold RVN4191 as a paid product. However, because the CP140 has been discontinued for over a decade, Motorola no longer sells or supports the software. This has pushed the software into a legal gray area. You will not find it on Motorola Solutions’ official download portal. Instead, users typically find the installer on third-party radio forums, eBay CDs, or technician backup drives.