MotoMaster Battery Charger (Model 11-1568-4)
The is an automatic, multi-stage charger designed for 12V lead-acid batteries. This model typically features a 4A charge rate for standard charging and maintenance. Safety First Ventilation : Always charge in a well-ventilated area.
Dry-Cell Warning:
Do not use this charger for dry-cell batteries (e.g., household alkaline batteries), as they may burst and cause injury.
Safety & Diagnostics
: It includes built-in protections against reverse polarity (with a flashing red fault LED), short circuits, and overheating. The charger automatically switches to a "Maintain" mode once full charge is reached to prevent overcharging.
- Position AC and DC cords away from hood, door, or moving engine parts.
- Connect the POSITIVE (RED) clamp to the battery’s positive (+) terminal.
- Connect the NEGATIVE (BLACK) clamp to a solid, unpainted metal part of the vehicle’s chassis (away from battery and fuel line).
- Set charger switches/buttons (refer to manual for your exact revision).
- Plug charger into AC outlet.
Note:
Always verify the exact specifications against your physical unit’s label, as Canadian Tire (the manufacturer of MotoMaster) occasionally releases minor revisions under the same model number.
5.1. Pre-Charge Setup
Connect Positive:
Attach the Red clamp to the positive terminal of the battery.
Motomaster Battery Charger 111568 Manual Extra Quality Site
MotoMaster Battery Charger (Model 11-1568-4)
The is an automatic, multi-stage charger designed for 12V lead-acid batteries. This model typically features a 4A charge rate for standard charging and maintenance. Safety First Ventilation : Always charge in a well-ventilated area.
Dry-Cell Warning:
Do not use this charger for dry-cell batteries (e.g., household alkaline batteries), as they may burst and cause injury. motomaster battery charger 111568 manual
Safety & Diagnostics
: It includes built-in protections against reverse polarity (with a flashing red fault LED), short circuits, and overheating. The charger automatically switches to a "Maintain" mode once full charge is reached to prevent overcharging. MotoMaster Battery Charger (Model 11-1568-4) The is an
- Position AC and DC cords away from hood, door, or moving engine parts.
- Connect the POSITIVE (RED) clamp to the battery’s positive (+) terminal.
- Connect the NEGATIVE (BLACK) clamp to a solid, unpainted metal part of the vehicle’s chassis (away from battery and fuel line).
- Set charger switches/buttons (refer to manual for your exact revision).
- Plug charger into AC outlet.
Note:
Always verify the exact specifications against your physical unit’s label, as Canadian Tire (the manufacturer of MotoMaster) occasionally releases minor revisions under the same model number. Position AC and DC cords away from hood,
5.1. Pre-Charge Setup
Connect Positive:
Attach the Red clamp to the positive terminal of the battery.