Gyd-9e Datasheet !!install!! -

is a specific model of an LED Power Supply Board (also referred to as a dual-port constant current board) primarily used for 15-24 inch LCD/LED televisions and monitor backlighting. Technical Specifications Based on merchant data from AliExpress Amazon Japan , the key technical parameters for the GYD-9E include: Input Voltage Range : 10V - 30V DC. Dimensions : Approximately 69mm in length and 19mm in width. Application

• Drone attitude estimation and stabilization
• Handheld device motion detection and gesture control
• Robotics balancing and odometry assistance
• Wearable activity tracking and fall detection
• Camera gimbals and image stabilization

Pro tip:

Apply thermal grease between the relay’s base plate and the heatsink. gyd-9e datasheet

Datasheet Parameters

• Input: 3–32 VDC
• Output: 3–60 VDC, 9 A continuous
• Wiring: Same pinout, but LOAD terminals are DC+ and DC-.
• Important: A DC-output SSR will have a MOSFET with a body diode—it conducts in only one direction. Ensure correct load polarity.

Derating Curve (Approximate)

• Control Voltage Range: 3–32 VDC (compatible with TTL, CMOS, and PLC outputs)
• Input Impedance: Approx. 1.5 kΩ to 2.5 kΩ
• Input Current (Typical): 5–15 mA at 5 VDC; 20–25 mA at 24 VDC
• Pick-up Voltage (Max): 2.5 VDC
• Drop-out Voltage (Min): 1.0 VDC
• Reverse Polarity Protection: Yes (built-in diode)

| Parameter | Symbol | Min | Max | Unit | |-----------|--------|-----|-----|------| | Input voltage | VIN | -0.3 | 30 | V | | Output voltage | VOUT | -0.3 | VIN+0.3 | V | | ADJ pin voltage | VADJ | -0.3 | 6 | V | | Operating temperature | T_OP | -40 | +85 | °C | | Storage temperature | T_STG | -55 | +125 | °C | | Thermal resistance (junction-ambient) | RθJA | - | 45 | °C/W | is a specific model of an LED Power