The is a three-phase power supply protector (also known as a phase sequence relay) primarily used to safeguard industrial equipment like motors, air compressors, and elevators from electrical faults . Product Overview
Post-patch improvements:
| LED Pattern | Meaning | Original Recommendation | Patched Fix | |-------------|---------|--------------------------|--------------| | Solid Green | Normal, phases OK | No action | No action | | 1 Red Blink | Phase loss on R | Check L1 fuse | Also check internal solder joint R1 – known batch issue | | 2 Red Blinks | Phase loss on Y | Check L2 | Measure voltage between Y and N – should be >100V | | 3 Red Blinks | Phase loss on B | Check L3 | Also indicates high harmonic distortion >15% | | Fast Red Flashing | Phase reversal | Swap any two phases | Use SW4 to lock sequence after fixing | | Slow Red (every 5 sec) | Unbalance >8% | Reduce load | Patched: Adjust VR2 potentiometer clockwise to increase tolerance | | 2 Green / 1 Red | Internal EEPROM error | Replace unit | Patched: Perform "factory reset" – short terminals 5-8 for 10 seconds | gmr32b+phase+controller+manual+patched