N15235 Motherboard Front Panel Connectors Updated: Foxconn

The Foxconn N15235 is not actually a specific model number but a certification code that appears on dozens of different Foxconn motherboards produced for OEMs like HP, Acer, and Lenovo. Because of this, finding the exact front panel header layout can be tricky.

Swapping these will cause the hard drive light to act as a power light—confusing but harmless. Use the updated table above. foxconn n15235 motherboard front panel connectors updated

6. Common Problems and Fixes

• PC won't turn on? Check the IEEE 1394 header. Shorting pins 1 & 2 on the main panel header will usually do nothing. You must short the FireWire header.
• Light stays solid? You have the HDD LED plugged into the Power LED pins.
• No video? This board often has integrated graphics but no dedicated VGA port on the I/O shield; it relies on a VGA card in the PCIe slot.

On some revisions of the Foxconn N15235, the missing pin (key) is on row 1, column 5. Always identify the square solder pad for pin 1. The Foxconn N15235 is not actually a specific

• Power Switch – non‑polarized; connect the two wires from chassis power button to pins 5 & 6 (or 6 & 8 – check manual; common is pin 6 (PWR) + pin 8 (GND) on some revisions).
• Reset Switch – pins 7 & 8 (or 7 & ground).
• Power LED – polarized (+ to pin 2, – to pin 4).
• HDD LED – polarized (+ to pin 1, – to pin 3).
• Pin 9 is missing (keying) to prevent reversed insertion.