Fanuc 11m Parameter List Page
Fanuc 11M
The (a classic CNC control from the mid-1980s) uses a parameter system that is more advanced than the 6M but less structured than the 0-series or 16/18 series. The "feature" of its parameter list is that parameters are primarily 4-digit numbers (0000 to 9999, though many are unused), organized into four distinct functional groups .
6700–6710:
Used for part counting. Setting 6700#0 to 0 enables counting on M30/M02 , as detailed by FactoryWiz . Diagnostic Monitoring fanuc 11m parameter list
- Machine setup and calibration: Parameters must be set correctly to ensure accurate and safe machine operation.
- Optimization: Adjusting parameters can improve machine performance, reducing cycle times and increasing productivity.
- Troubleshooting: Knowledge of parameters can help diagnose and resolve issues, such as alarms, errors, or unexpected behavior.
These define which software features are enabled on the control. FANUC Second Reference Point - CNCmakers Fanuc 11M The (a classic CNC control from
- P1000: Maximum travel distance (X-axis)
- P1001: Maximum travel distance (Y-axis)
- P1002: Maximum travel distance (Z-axis)
- P1010: Rapid traverse rate (X-axis)
- P1011: Rapid traverse rate (Y-axis)
- P1012: Rapid traverse rate (Z-axis)
These parameters enable specific software features. Exercise extreme caution, as these vary by machine manufacturer. 9101 bit 0 : Single Direction Positioning. 9102 bit 0 : G10 Program Input of Offset. 9102 bit 1 : Inch/Metric Conversion. 9110 bit 1 : 200 Programs Memory. 9111 bit 0 : Custom Macro B. 9111 bit 2 : Rigid Tapping. 9116 bit 0 : Part Counter. Maintenance & Servo Basics Backlash Compensation Machine setup and calibration : Parameters must be
The Fanuc 11M parameter list consists of a series of numerical values that define the system's behavior, set default values, and configure various functions. These parameters are stored in the system's memory and can be accessed, modified, and saved as needed.
