Dialux 314 __link__ May 2026

DIALux 4.x

The software is currently in its series (with the latest being DIALux 4.16) and the newer DIALux evo series (currently evo 12/13).

1. New project → Room → set dimensions and reflectances.
2. Import manufacturer IES file or create luminaire with given flux and distribution.
3. Place luminaires in 4×4 grid; set mount height.
4. Set workplane 0.75 m, grid 0.5 m, maintenance factor 0.72.
5. Run calculation; check avg lux, uniformity, UGR.
6. Adjust luminaire count/output until targets met.
7. Add controls, save .evo, export PDF calculation report and DWG layout.

: A critical part of the "story" is ensuring the light is evenly distributed. Designers use DIALux to calculate the uniformity ratio dialux 314

3. Luminaire Import

I’m not sure what you mean by “dialux 314: give me a complete piece.” I’ll assume you want a complete Dialux lighting project file description (room, fixtures, calculations, and export-ready settings) for a typical scenario. I’ll produce a ready-to-implement Dialux project specification you can recreate in DIALux evo (including geometry, luminaire choices with photometric assumptions, calculation grids, target illuminances, and export notes). If you meant something else (a file, a code snippet, or a specific standard), tell me and I’ll adjust. DIALux 4

2. Native IES XML Support