The Dell D220P-01 Go to product viewer dialog for this item.
The connector is a proprietary plug. While it is mechanically similar to an 8-pin EPS12V connector, it is not electrically compatible ; plugging it directly into a standard motherboard will cause permanent damage. Wire Color Signal / Description 1 Remote + (Signal) 2 +12V Output 3 Ground (-) 4 +12V Output 5 Remote Ground / Signal 6 +12V Output 7 Ground (-) 8 +12V Output / Signal
Includes Over Voltage (OVP), Over Current (OCP), and Short Circuit Protection (SCP). Modification & Usage Tips Dell D220p 01 Power Supply Pinout 2
or powering RC battery chargers due to its high amperage and reliable 12V output.
The D220P-01 ignores the main connector’s PS_ON# (Pin 14 is empty). You must use the Green wire on the secondary 6-pin connector. The Dell D220P-01 Go to product viewer dialog for this item
The fluorescent lights of the repair shop hummed in B-flat, a drone that Elias had tuned out years ago. His workspace was a chaotic mosaic of logic boards, solder splatters, and discarded heat sinks. But in the center lay the artifact.
The Dell D220p 01 power supply typically features a standard ATX power connector. Here's a breakdown of the pinout: Wire Color Signal / Description 1 Remote +
| Symptom | Likely Cause | Fix | |---------|--------------|-----| | No power, fan doesn’t spin | PS_ON not shorted (pin 8) | Short green to black | | PSU shuts down after 1 sec | No load on +5V | Add 5V load (HDD/resistor) | | 3.3V reads 2.7V | Brown sense line open | Tie brown (pin 18) to any orange (+3.3V) | | PC restarts randomly | PW-OK (gray) unstable | Check caps; replace if bulging (common on D220P-01) |