Dap-1360 Firmware 6.10 Download !link! -

Important Note:

D-Link has removed older firmware versions from many of its official regional support sites. Version 6.10 is not the latest firmware for most hardware revisions; however, if you specifically need this version for compatibility or legacy network reasons, follow the instructions below.

Overview of DAP-1360 Firmware 6.10

• A Windows PC or Mac with an Ethernet port (do not do this over Wi-Fi).
• The firmware .bin file downloaded.
• The DAP-1360 plugged into a power source.
• A paperclip (for factory reset).

1. Connect PC to LAN port of DAP-1360 (not Wi-Fi).
2. Set PC IP to 192.168.0.10 / Subnet 255.255.255.0.
3. Access http://192.168.0.50 (default).
4. Login (default: admin / blank or admin / password).
5. Go to Tools → Firmware.
6. Click Browse → select the v6.10 .bin file.
7. Click Upload. Do not power off or interrupt for 3 minutes.
8. After reboot, reset to factory defaults (press reset pin hole for 10 sec).