Convo Inverter Cvf-s1 Manual Now

Convo CVF-S1 (also known as the FSCS01 series a high-performance, compact variable frequency drive (VFD) designed specifically for low-power, single-phase motor applications . It is manufactured by Bosch Rexroth (Xi'an) Electric Drives and Controls , a subsidiary of the Bosch Group. Core Specifications Power Range: Typically covers 0.4 kW to 2.2 kW. Single-phase AC, 180V–260V (50/60 Hz).

(Note: If you want, I can extract model-specific specs and the official user manual PDF if you provide the exact submodel number or the product label details.) Convo Inverter Cvf-s1 Manual

Disclaimer: This guide synthesizes information typical of the Convo CVF-S1 series. Actual parameter addresses (e.g., F0.19) may vary slightly by firmware revision. Always verify with your specific printed manual or the PDF provided by your distributor. Convo CVF-S1 (also known as the FSCS01 series

Introduction to Convo Inverter CVF-S1

Chapter 4: Troubleshooting Common Error Codes

Original Display Recovery

: To return to the original frequency display after setting parameters, you can select parameter d-00 and click SET , or perform a long press on the SET key for 3 seconds. Mounting : Mount the inverter on a flat,

  1. Mounting: Mount the inverter on a flat, stable surface using the provided mounting brackets. Ensure good airflow around the inverter to prevent overheating.
  2. Power Connection: Connect the power supply to the inverter's power terminals. Ensure the power supply matches the inverter's specifications.
  3. Motor Connection: Connect the motor to the inverter's motor terminals. Ensure the motor matches the inverter's specifications.
  4. Grounding: Ensure the inverter is properly grounded to prevent electrical shock.

The Convo CVF-S1 Instruction Manual outlines the following core capabilities:

F0.04

0: Potentiometer; 1: Panel buttons; 3: AVI (0-10V); 5: ACI (4-20mA) Max Input Frequency Standard is 50.0 Hz; adjustable up to 999 Hz F0.05 Upper Limit Frequency Sets the maximum allowable running frequency F2.13 – F2.17 Digital Input Settings