Full [cracked] | Cobra 3195 Alarm Manual
Cobra 3195 is a modular alarm system typically controlled via the vehicle's original remote. While a single "full text" digital manual is rarely hosted as a plain text file, the system's operation and installation are covered by these key technical specifications and procedures: System Overview The 3195 is a CAN-bus or PLIP
- Turn ignition ON. (LED turns solid).
- Turn ignition OFF. (LED starts flashing).
- Count the LED flashes. Turn ignition ON when the flash count matches the first digit of your PIN code.
- Repeat for all digits of the PIN code.
- If entered correctly, the system will disarm.
Components and Accessories
Print this sheet and tape it near the control panel for fast reference. cobra 3195 alarm manual full
4. Adding / Managing Users
PIN Entry
: Turn the ignition ON and OFF three times within seven seconds. The dashboard security LED will light up for three seconds. Cobra 3195 is a modular alarm system typically
1. Quick‑Start Summary
ARM – Press ARM button (30‑s delay) DISARM – Enter PIN + ENTER MODE – Cycle OFF / HOME / AWAY SILENCE – Hold SILENCE 3 s (panic) TEST – Press TEST → select zone → ENTER MENU → SETUP – Adjust TIME/DATE, MOTION SENS, ARM DELAY MENU → USER – Add/DEL user (MASTER vs USER) MENU → COMM – GSM/Wi‑Fi config, test alerts MENU → SYS – FACTORY RESET, FIRMWARE UPDATE Turn ignition ON
Passive Arming
: If enabled, the system automatically arms 30 seconds after the ignition is switched off and the last door is closed.