Bosch Serie 6 Service Mode Extra Quality File

I have structured this as a comprehensive guide, suitable for a blog post, a technical forum, or a home appliance repair article.

• Do not run the water inlet test with an open door or no drain nearby.
• Do not run the heater test dry – it can melt plastic components.
• Do not expect a factory reset just by entering – that’s a separate deeper sequence (usually dial to position 1, hold Start for 5 seconds within service mode).

• Read and clear stored fault codes.
• Run motor tests (clockwise/counterclockwise).
• Activate drain pump and inlet valves.
• Heat element test.
• Activate door lock/unlock.
• Display sensor values (pressure, NTC temperature, door switch state).
• Perform automatic calibration or drain/pump auto-test cycles.

Here is a breakdown of the most useful menus for the average user: bosch serie 6 service mode