Airbot Hypersonic Pro Manual <PREMIUM · 2024>

Airbot Hypersonics Pro

The is a cordless stick vacuum featuring a smart LED touchscreen and a powerful 27,000Pa suction motor.

Q: Can I use the Airbot Hypersonic Pro on wet floors?

A: Absolutely not. This is a dry vacuum only. Sucking up water will short-circuit the motorized head and destroy the HEPA filter. airbot hypersonic pro manual

: Ensure all parts (main motor, extension wand, floor brush, crevice tool, and 2-in-1 brush) are present. Connect Wand Airbot Hypersonics Pro The is a cordless stick

This guide is an independent, user-friendly interpretation of the official Airbot Hypersonic Pro manual. For warranty claims or safety certifications, always refer to the printed documentation included with your device. First charge: Charge for 4-5 hours before first

• First charge: Charge for 4-5 hours before first use, even if the display shows 50%.
• Partial charging is fine: Unlike old NiCad batteries, you can top up the Li-Ion battery anytime.
• Do not overheat: If the battery temperature exceeds 113°F (45°C), the vacuum will shut down. Do not charge the battery immediately after using Boost mode; let it cool for 30 minutes.
• Charging indicator: When plugged into the wall dock, the LED ring pulses white. A solid white ring means full charge.
• Storage: If storing for more than 3 months, charge to 70% (not 100%) and store in a cool, dry place.

• Dimensions: 24.5 x 14.5 x 10.5 inches (62.5 x 36.8 x 26.7 cm)
• Weight: 22 pounds (10 kg)
• Power Consumption: 50W
• CADR: 500 CFM (cubic feet per minute)
• Noise Level: 25 dB

• Store batteries at 3.8–3.85V per cell for long-term storage.
• Never puncture, crush, or short battery terminals.
• Charge on a non-flammable surface and never unattended.
• Balance-charge the pack and monitor cell voltages after charge.
• Dispose of damaged LiPo batteries at approved recycling centers.

• Preflight: Inspect props, motors, arms, and battery for damage. Secure camera and payload.
• Environment: Avoid flying near people, animals, or in restricted airspace. Follow local regulations (height limits, no-fly zones).
• Batteries: Use only recommended LiPo batteries. Never charge unattended; follow proper storage and disposal.
• Propellers: Always remove propellers when configuring the flight controller on bench.
• Cold Weather: Expect reduced battery performance below 10°C; keep batteries warm before flight.
• Firmware: Install firmware updates only from trusted sources.

AIRBOT Cordless Vacuum Cleaner, 3-in-1 Handheld ... - Amazon.de