Aboled Sc-ds-d 2014-i Kontroller Guide

This controller was designed to drive LED modules, allowing business owners to program moving text, simple graphics, or time/temperature data onto illuminated signs.

When this controller begins to fail, you will see specific error codes. Here is a field guide: Aboled sc-ds-d 2014-i kontroller

  1. DVI-D IN: Primary video input. Supports up to 1920x1080@60Hz or 2048x1152@60Hz.
  2. HDMI IN: Secondary input; auto-switches if DVI signal is lost.
  3. USB-B: Configuration and firmware update port (uses proprietary Aboled Protocol, not standard CDC).
  4. RJ45 OUT 1-4: Sends proprietary packetized RGB data to receiver cards.
  5. DC 12V: 2.1mm center-positive barrel jack.
  6. RS232 (DB9): Reserved for external control systems (e.g., Crestron, AMX).

: Most versions utilize a USB port for data transfer or a serial connection for direct PC communication. Configuration Guide This controller was designed to drive LED modules,

  • "2014-i": This is likely the model year (2014) or a version index.
  • "kontroller": The word "Controller" (spelled in the German/Scandinavian style).

    • Motor Terminal Block (X2):

    Critical:

    Discharge the internal capacitors for at least 10 minutes before touching any terminal. The 2014-i has been known to hold 330V DC for hours after power down. DVI-D IN: Primary video input