188362 Schematic Link -

Jemena Gas Networks

In the world of urban planning and infrastructure, "188362" represents a massive undertaking in energy expansion. For in Australia, this was the specific forecast for new gas connections .

Further Reading & Resources:

1. Isolate Power and Pressure: Ensure the compressor is off and the tank is drained. This valve holds pressure; opening it under pressure is dangerous.
2. Remove Coil: Unscrew the acorn nut on top and slide the coil off the core tube.
3. Remove Core Tube: Unscrew the core tube assembly (brass cylinder) from the valve body.
4. Inspect the Pilot Seat: At the bottom of the core tube, you will see a small rubber button. If it is swollen, cracked, or indented, the valve will not close. Replace the core tube or rebuild kit.
5. Inspect the Body/Diaphragm: Look inside the main body. If you see debris, the pilot channel is likely clogged. Clean with solvent. Check the main rubber diaphragm for tears.

2. Schematic & Flow Diagram

Symptoms:

No DC voltages on secondary side. Primary capacitor holds high voltage (e.g., 325V) even after power-off. 188362 schematic